Preserving the craft. Building its future.

Clay tile · Daylighting

Will a glass tile bring daylight through a clay roof?

Follow the light from a profile-matched glass tile to the room before comparing it with a complete skylight.

By the Slate, Tile & Metal Guild ·

On a roof plan, a clear square among the clay tiles can look like a daylight opening. Turn the drawing on its side and the question changes. What will the light strike immediately below the glass, and how will it reach the room?

La Escandella lists a glass accessory, Q41C, that admits light and fits its Flat/TL tile. The manufacturer gives the piece dimensions as 466 by 260 by 55 millimeters. Those measurements help identify the exterior unit. They do not give the area of an opening through a deck or the amount of daylight arriving at a worktop.

Draw the section before ordering the accessory

Compare an open structure where the underside of the covering is visible with a finished room under opaque sheathing and a ceiling. In the second case, simply replacing a clay tile with a glass unit would light the top of the opaque layer. Ask the designer to trace the intended path all the way to the room and identify the glazing, water management and interior finish for the proposed assembly.

For bidding, label the accessory price and the completed daylight opening separately. Request model-specific documentation and confirmation of local acceptance for the intended use. If the design calls for a curb-mounted skylight, use the curb and flashing identification guide to record that assembly’s own dimensions.

Further reading

La Escandella — Q41C glass tile for the Flat/TL profile. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles