Look at the width range on a random-width slate quote. If the widest stone on the truck will be 12 inches and the approved detail calls for a 14-inch blank beside a valley, ordering another square of the same mix will leave the slater with the same problem.
Those widths come from an example in the National Slate Association’s sample specification. It describes a field of 9- to 12-inch-wide slates and calls out 14-inch-wide pieces for approaches and certain edge conditions. Your roof drawing and slate layout will determine the actual widths and locations. An approach slate is the piece leading into a feature such as a valley, where cutting changes the width available to cover the underlying courses.
Count the edges on each slope drawing
Have the slater mark which courses require a wide blank on the left and right sides of each valley. A valley shared by a long main slope and a short dormer may have different course layouts on its two sides. Counting its length once gives the supplier no way to know how many wide pieces to reserve for either side.
Ask the supplier to show the wide blanks as a separate piece count and mark their pallets. Clarify how much field coverage those pieces already contribute to the quoted total. Otherwise, correcting a shortage of wide stone can create a second error when the same area is counted twice. Bring the marked drawing to the supplier and installer’s order review.
