Preserving the craft. Building its future.

Clay tile · Building conservation

What will visitors see from below after a peg-tile roof is relaid?

Mark the bays visible from an open interior before specifying replacement laths or underlay on a historic roof.

By the Slate, Tile & Metal Guild ·

Stand where a visitor can see the underside of an old peg-tile roof. On an open porch or an unceiled outbuilding, the narrow strips of timber that carry the tiles may be part of the finished view. A drawing of the building from outside can show a faithful match in clay tile while telling the owner little about what will be visible from that spot.

Traditional British peg tiles could hang on wooden pegs over laths. The Society for the Protection of Ancient Buildings identifies the appearance of the underside as a consideration in choosing replacement laths, fixings and underlay. Its guidance gives split timber laths and oak pegs as examples of features that may merit matching where they can be seen.

Draw a section through one visible bay

Before bidding, have the team mark on a plan where the view from below begins and ends. Photograph a representative bay from floor level. Include a post, rafter or other fixed reference so the same view can be taken after the work. On a section through that bay, ask the designer to identify what the visitor will see between the rafters under the proposed detail. If a membrane is planned, ask where its face or edge will be visible.

A sample bay can settle a disagreement that a box of matching clay tiles cannot. Review it from below as well as outside. Record which areas share that detail and which have ceilings concealing the work. Attach the section and views to the historic tile repair scope so bidders can price the visible carpentry and the weather protection together.

Further reading

Society for the Protection of Ancient Buildings · Clay plain-tiled roofs. SPAB discusses traditional British plain-tile construction. A conservation designer should resolve the detail for the particular building and its local requirements.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles