Two slate-clad faces of a dormer meet at an outside corner. The elevation shows a fine vertical line, and the sample board settles the question of stone colour. The person pricing the corner still needs to know what sits behind the bevelled edges. That part of the assembly disappears as each course goes on.
Welsh Slate illustrates a close mitre in its guidance for vertical slating. The cut stone forms the visible corner. Behind it, the manufacturer calls for lead soakers interleaved with the slates and secured to the battens at their upper edges. A photograph taken square to the finished corner can settle a disagreement about the cut or joint width. It cannot establish which concealed detail the bidder included.
Request two views of the same corner
Ask the designer to mark the corner on the elevation and provide a horizontal section through it. Label the cuts on each face, the metal behind the joint and the support. Use a second sketch or a partly assembled sample to show how the next course overlaps the work below. Ask who provides the shaped metal and whether its fabrication is included in the price. File an installation photograph while one course is still open, keyed to that corner.
For a dormer with a window close to the corner, mark the jamb separately. The corner detail alone leaves the connection to the window unresolved. The network’s guide to slate fasteners and flashing provides background for the discussion with the slater.
