A tile replacement list calls for two “exhaust vents.” One serves a bathroom fan. The other ventilates the roof space. A supplier can match the tile color and profile on both and still deliver the wrong part if the list never says where the air comes from.
Start with the fan. Its duct needs a continuous route to an outdoor termination. The Department of Energy’s ventilation guide describes that route and warns against discharging exhaust into an attic. A duct lying near a passive roof vent leaves a gap where moisture can enter the roof space.
The word exhaust also appears in O’Hagin’s clay tile attic vent drawing. There it identifies the high outlets paired with lower intakes to ventilate the roof assembly. The drawing addresses a different air path from a duct attached to a bath fan.
Give each opening a destination
Have the roofer and mechanical contractor match each roof opening to the room or space it serves. For the fan, record the duct size, proposed termination model and who verifies the connection and operation after the roof work. For the attic outlet, record its position in the ventilation design and the intended replacement model. An untraced opening can stay marked “function unconfirmed” until someone can inspect it.
Once the functions are clear, identify the surrounding tile profile for the flashing or vent base. The Tile Roofing USA matching guide helps document that separate fit question.
