Preserving the craft. Building its future.

Concrete and clay tile · Roof penetrations

What supports an antenna mast where it passes through a tile roof?

Check the mast support, collar size and roof pitch before the antenna installer and tile roofer order their parts.

By the Slate, Tile & Metal Guild ·

A roof plan can show a circle marked “antenna” without telling the roofer what holds the mast upright. Bring two details to the coordination meeting. One should show how the support carries the mast into the structure. The other should show how the roof stays weathertight where the mast passes through the tiles. Otherwise each installer can arrive expecting the other to supply the bracket.

FLECK’s variable antenna feedthrough is an example. The molded piece takes the place of a field tile, and a flexible collar fits around the rod. Its technical sheet directs the installer to secure the rod to the roof structure. The product listing calls out four rod diameters in millimeters and lets the buyer select the surrounding tile model. A collar that fits the rod can still come with the wrong base for the roof.

Resolve a discrepancy before ordering

The manufacturer’s English web listing gives an upper pitch of approximately 55 degrees. Its December 2023 technical sheet gives approximately 45 degrees. For a 50-degree roof, those two documents lead to different purchasing decisions. Send the exact tile model, measured pitch, mast outside diameter and part number to the manufacturer for written confirmation before committing to that fitting.

For a U.S. project, have the designer identify a locally suitable assembly and show the support detail. Record who will provide the support, who will seal the penetration and who will inspect each before concealment. The Guild network’s guide to penetrations in tile roofs gives owners background for that conversation.

Further reading

FLECK — Variable antenna feedthrough tile and linked technical data. The product listing and its technical sheet describe one manufacturer’s accessory. Confirm the current part and its limits for the individual roof.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles