Preserving the craft. Building its future.

Slate · Fabrication

Can the shop turn the pattern sideways to get another slate?

Mark the direction of the grain on the cutting sketch before counting what can be recovered from a larger piece.

By the Slate, Tile & Metal Guild ·

Lay a paper template on a large piece of slate and turn it a quarter turn. The rectangle still fits. Whether the resulting piece meets the order can depend on which way the stone runs. This matters when pricing a batch of straight-sided repair pieces to be trimmed from larger stock.

James River Slate’s sample specification addresses stone with a pronounced grain. It calls for fabrication with the long dimension of the roofing slate parallel to the grain, and for a random check of grain direction in each shipment. If a project's specification adopts that requirement, a cutting layout needs one more piece of information than the usual length and width.

Draw the arrow before counting the pieces

Ask the supplier to identify the grain on the parent stock and explain how it will be verified for the selected stone. Transfer that direction to the cutting sketch. Draw an arrow along the intended length of each finished slate. A second rectangle squeezed into the corner with its arrow running across the first is a candidate to question before the yield goes into the price. On a custom shape, label the head and exposed end as well.

Keep the agreed layout with the purchase order. If the shop proposes different stock, revisit the yield using its dimensions and the grain requirements in the actual specification. The Slate Roofing USA quantity calculator can help establish the field count. The cutting sketch explains how the shop expects to supply that count.

Further reading

James River Slate — Slate Roofing Specifications, physical requirements. The cited document describes its own project or geographic scope.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles