Preserving the craft. Building its future.

Slate · Plumbing coordination

Will the same pipe flashing fit both slate roof pitches?

Check the soil vent’s outside diameter against the flashing collar and the local roof pitch against the same model’s stated range.

By the Slate, Tile & Metal Guild ·

The plumbing schedule shows identical vertical soil vents over the main roof and a steep dormer. The purchaser wants one flashing detail for both. In UK catalogues a “weathering slate” can mean the manufactured flashing that seals a penetration. Ordering one involves more than choosing a stone to match the surrounding courses.

Pair each pipe with its own roof plane

Take a pipe with a confirmed outside diameter of 110 mm. The DEKS DNLS103B product table gives a pipe range of 50–170 mm and a pitch range of 0–45 degrees. On a 35-degree slope the example falls inside both published ranges. Put the identical pipe on a 50-degree slope and the collar diameter still looks right, but the pitch falls outside the stated range. Buying two identical units would leave the dormer detail unresolved. The flashing’s lower pitch limit says nothing about the minimum pitch of the natural slate covering.

Have the plumber identify the pipe material and actual outside diameter, and the roof designer record the slope at each penetration. Give the roofer the model number and the base dimensions so the drawing can show how the base meets the surrounding courses. For the steeper location, ask for a suitable alternative and its installation detail before placing the order. Keep those details alongside the other slate roof flashing specifications. Flues and other hot penetrations warrant their own appliance-specific review.

Further reading

DEKS Industries Europe · Nxt Gen Weathering Slate, product table for DNLS103B. Model dimensions are from the UK manufacturer’s product table. The layouts are hypothetical and concern ordinary soil vent pipes.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles