Preserving the craft. Building its future.

Natural slate · Rainwater collection

Which part of a slate roof fills one rain barrel?

Trace one downspout on a roof plan and use rainfall depth to estimate how much water could reach a barrel in a single shower.

By the Slate, Tile & Metal Guild ·

You have a slate roofing estimate in square feet and a 55-gallon barrel in mind for the garden. Can the estimate tell you how quickly the barrel will fill? Start at the downspout where the barrel will sit. A roofing estimate counts the material covering the slopes, sometimes with extra for cuts. The barrel catches only the rain that lands above its own drainage route.

Trace the route looking straight down

Imagine a simple gable with a 40-foot ridge. On the garden side, the horizontal distance from ridge to eave is 12 feet. The sloping distance is 15 feet. That face takes 600 square feet of slate before allowances, but its footprint viewed from above is 480 square feet. The opposite face drains toward the street. Leave it out of the garden calculation.

Now follow the garden gutter. Suppose a high point halfway along it sends water toward separate outlets at the two ends. Each drains a 20-by-12-foot footprint. Your barrel at one end gets 240 square feet. If the whole gutter instead falls toward that barrel, the area doubles. Mark the actual outlets and direction on a plan before settling on a number. A dormer or upper downspout may also send water across your penciled boundary.

Turn a shower into gallons

A half-inch shower over the 240-square-foot footprint gives 240 × (0.5 ÷ 12) = 10 cubic feet of rain, or about 75 US gallons. That is the theoretical amount falling on that footprint. If an empty 55-gallon barrel received all of it, roughly 20 gallons would overflow. If the barrel already held 30 gallons, only 25 gallons of space would remain. Real collections vary with losses and any water diverted before it reaches the barrel.

For your own sketch, record the connected footprint, the rainfall depth you assumed, and the free capacity at the start. Identify where overflow will go. These figures answer a volume question; they cannot tell you the peak flow through a gutter during a downpour. For water quality and intended use, see the Guild guide to the collection path. Where two roof levels meet, Slate Roofing USA’s upper-roof runoff guide can help you trace the extra contributing area.

Further reading

USDA Natural Resources Conservation Service — Rainwater Harvesting. The example calculates a theoretical event volume. A designer would need other information to size gutters, outlets or storm piping.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles