Preserving the craft. Building its future.

Slate · Adjoining roofs

Can the ridge tile cross the line between a slate roof and its neighbour?

Draw the finished heights on both sides of a shared ridge before pricing the top of a bonding gutter.

By the Slate, Tile & Metal Guild ·

A terrace owner plans to renew the slate on one house. The tiles next door will stay. The drawing shows a narrow gutter running up the boundary between the coverings, then stops at the ridge. That last junction deserves a drawing of its own. A single line across the top of the elevation can conceal a step between the two finished roofs.

Start with the surfaces the ridge tile will meet

Ask the surveyor for a section through the junction showing the top of each finished covering. A shared structural ridge does not establish those two heights. For example, if a covering is being changed on only one side, a photo of the old ridge tells the detailer how it used to meet its neighbour. It cannot show how high the newly specified layers will finish. Label the existing and proposed surfaces separately.

Hambleside Danelaw shows two terminations for its dry-fix bonding gutter. With level coverings, the ridge tile can cross the joint over a locally lowered central upstand. Where one covering finishes higher, the ridge tiles end against the shaped upstand. Both versions include a saddle flashing over the intersection. That saddle belongs on the drawing and in the price even when the ridge appears continuous.

Resolve the boundary before ordering

Have the roofer mark which ridge pieces will be disturbed, where each new or retained piece ends, and who will complete the saddle. If the detail involves the neighbouring roof, settle access and scope before work starts. Keep the approved sketch with the quote so a change in slate thickness or the adjacent tile profile goes back to the person who detailed the junction. The Slate Roofing USA ridge guide gives background on the wider ridge assembly.

Further reading

Hambleside Danelaw · Dry Fix Bonding Gutter at the ridge, manufacturer’s junction guidance. This is a UK manufacturer’s detail for its own dry-fix bonding gutter. Other systems need their own termination detail.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles