Preserving the craft. Building its future.

Clay tile · Historic survey records

A survey says “hollow clay tile.” Which part of the building has a tile roof?

A Florida district nomination shows how to distinguish a tile wall structure, a flat roof and a narrow barrel-tiled projection.

By the Slate, Tile & Metal Guild ·

Searching a historic district survey for the word “tile” can turn up the right building and the wrong roof area. At the Rowe Building in Lake Worth, Florida, the nomination describes hollow clay tile as part of the structural system. The exterior is brick. The principal roof is flat. Barrel tile appears on a pent roof, a separate projection above the second-story windows.

Those are three different entries on a condition survey. Record the wall construction under structure, the main roof under its own heading and the projecting roof under a third. The word “flat” describes the main roof’s form. It does not, by itself, identify its waterproofing material. Keep that material listed as unknown unless there is separate evidence.

Measure the projection the writer described

For a preliminary scope, find the window group on the historic elevation or photograph, then locate the corresponding feature on a current survey. Record how far the pent roof runs along the facade and its length measured down the slope. Check whether it turns the corner. An estimator who multiplies the building footprint by a barrel-tile coverage rate could price a whole tiled roof where the survey documents only a narrow strip.

The nomination describes what its authors observed. Later work may have changed the covering or removed the projection. Cite the document date and section, then ask for a current photograph or field confirmation before converting historical evidence into a purchase quantity. If existing pieces survive, the Guild’s clay tile matching record helps connect the specimen to the roof area it came from.

Further reading

National Register of Historic Places — Historic Old Town Commercial District nomination, section 7. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles