Preserving the craft. Building its future.

Slate · Shop planning

Will the shop’s slate cutter handle the thickest course?

Compare the actual thickness of the pieces scheduled for trimming with the cutter’s stated capacity before the material leaves the yard.

By the Slate, Tile & Metal Guild ·

A graduated slate order can reach the shop in several thicknesses. The crew may know its cutter works well on the ordinary field pieces. The question for the shop foreman is which pieces still need trimming, and how thick those particular pieces are. A sample from the upper courses can give a misleading answer for the work at the eaves.

Take the Stortz 95-A as one example. The manufacturer rates it for natural slate up to 3/8 inch thick and identifies straight and curved cuts among its uses. Suppose the schedule calls for 1/4-inch pieces on the upper courses and 1/2-inch pieces lower down. A curved cut in half-inch stock still falls outside that cutter’s stated range, however short the cut is. A fresh blade changes the condition of the tool. The published capacity remains 3/8 inch.

Mark the cuts on the order

Against each size and thickness group, list the pieces that will arrive finished and the ones the shop must shape. Mark whether the cut will leave a visible edge. Have the person doing the trimming check representative stock, including the heavier pieces, against the model on hand. If a group exceeds the rating, settle who will provide suitable equipment or pre-shaped pieces before that group ships. An approved sample edge gives the shop and supplier something concrete to match.

Keep the cutting notes with the course schedule so a thickness substitution reaches the shop as well as the buyer. Slate Roofing USA’s guide to graduated roofs explains how the sizes change over the slope.

Further reading

John Stortz & Son — 95-A slate cutter, trimmer and punch specifications. The quoted thickness limit applies to the identified cutter.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles