A museum volunteer preparing a display sees a notch where the raised side of a Roman clay roof tile ends. It would be easy to crop that corner out of the photograph as damaged. On a tegula, a flat roof tile with raised edges along its sides, the notch may be part of the original overlap. A view of the opposite face helps explain it.
The published York Station Gateway excavation describes two different recesses. At the upper end of a tile, the cut-away interrupts the top surface of the raised edge, or flange. At the lower end it is on the underside. When successive tiles overlapped down the slope, these recesses let the neighboring flanges fit together. One face-up view will show only part of the geometry.
Make a record that another reader can orient
For an object already in a collection, ask the collections team for views along the flange and of the opposite face, with a scale and the object number. Label the proposed uphill end on a copy of the image. Identify where the flange survives, where there is a shaped recess and where a later fracture has removed the evidence. If only a middle fragment survives, leave the end orientation open. At York, many clay fragments were too incomplete to assign to a specific form.
A roof diagram beside the specimen can show how adjacent pieces met without putting fragile originals together. Keep the interpretation attached to the catalog record and the original photographs. The Tile Roofing USA photographic record guide offers related advice for connecting detail views to a larger roof context.
