Preserving the craft. Building its future.

Slate · Reading aerial imagery

Can you count missing slates in a county aerial photograph?

Use the image date and ground resolution to decide which questions an archived aerial photograph can answer about a roof.

By the Slate, Tile & Metal Guild ·

A dark square appears on an aerial image of a slate roof. Before circling it as a missing piece, find out what one pixel represents. When several slates contribute light to the same pixel, enlarging the image makes the square bigger without revealing which piece was there.

Compare the scale with something you know

Suppose the original imagery has a ground resolution of 0.6 meter per pixel. One pixel spans roughly 24 inches on the ground. A nominal 12-inch-wide slate is only half that distance even before considering how the sloping roof projects into the overhead view. A single dark pixel cannot support a count of individual 12-inch pieces. A broad change extending across many pixels may still help locate a wing or a roof plane for closer examination.

The USGS data dictionary distinguishes the acquisition date from the date an image entered the dataset. Save the image identifier, date acquired and resolution from the original product record. If a county viewer displays a mosaic, check which acquisition actually covers the building. The date you opened the viewer tells the next researcher when you looked, rather than when the aircraft passed overhead.

Give the roofer the uncropped view, mark the slope in question and describe the feature at the scale it actually occupies. Then request a dated photograph detailed enough to resolve individual edges. The Slate Roofing USA drone survey guide can help define that follow-up request.

Further reading

U.S. Geological Survey — National Agriculture Imagery Program Data Dictionary. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles