Preserving the craft. Building its future.

Slate · Receiving a mixed-width order

Two crates hold 360 slates each. Did they deliver equal roof area?

Convert each size on a mixed-width delivery ticket into roofing squares before adding the shipment total.

By the Slate, Tile & Metal Guild ·

A receiver counts 360 narrow slates on one pallet and 360 wide ones on another. Half the pieces came in each width. How much of the roof will each pallet cover? The National Slate Association’s receiving method assigns each size its own pieces-per-square figure before the totals are added.

Work one ticket from pieces back to squares

Suppose both sizes are 19 inches long and the specified headlap in a standard double-lapped field is 3 inches. The nominal exposure is 8 inches. Ignoring joint gaps for this example, a 10-inch-wide slate shows 80 square inches. It takes 180 of those faces to make one 100-square-foot roofing square. A 12-inch-wide slate at the same exposure shows 96 square inches and takes 150 pieces per square.

The narrow pallet therefore represents 360 ÷ 180 = 2 squares. The wider pallet represents 360 ÷ 150 = 2.4 squares. The ticket accounts for 4.4 squares of theoretical field coverage. Dividing all 720 pieces by the narrow-slate factor would credit the shipment with only 4 squares.

For an actual delivery, enter the supplier’s coverage basis beside each size and check that its headlap matches the order. Keep starter, ridge and other special pieces on separate lines. The Slate Roofing USA quantity calculator provides a second check on the nominal field arithmetic before allowances for cuts or breakage.

Further reading

National Slate Association — Technical Bulletin 4. The reference supports the material or estimating discussion.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles