Preserving the craft. Building its future.

Concrete and clay tile · Rainwater collection

How much of a tile roof actually feeds the garden cistern?

Trace the connected downspouts and use the roof’s horizontal footprint to check the volume in a landscape proposal.

By the Slate, Tile & Metal Guild ·

A tile order covers the sloping surface and may include spare pieces. A cistern estimate starts with the area that catches rain and drains to the tank. Using the tile order to size the tank can inflate the estimate twice, first by counting the pitch and again by counting roof faces whose gutters drain elsewhere.

On a plan view, trace the paths back from the cistern inlet. Shade only the footprint of the roof sections that feed those downspouts. Count an upper slope once if it empties onto a connected lower one. Leave a detached garage out if its downspouts discharge onto the lawn.

Check one inch of rain

The Texas Water Development Board gives a theoretical yield of roughly 0.62 gallon per square foot for one inch of rain. Suppose a clay tile roof has a 2,000-square-foot footprint, but the connected side accounts for just 800 square feet. One inch falling on that side represents about 496 gallons before losses. The board’s runoff example assumes 80 percent collection efficiency. Applying that assumption here would give about 397 gallons. Actual collection depends on conditions including surface texture, first-flush diversion and how much room is left in the tank.

Ask for the shaded drawing and the assumed efficiency with the landscape proposal. If the roofer reroutes a downspout, revise the shaded area. Keep the roofing quantities in the separate tile takeoff and accessory schedule.

Further reading

Texas Water Development Board — The Texas Manual on Rainwater Harvesting, chapter 4. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles