Preserving the craft. Building its future.

Slate · Owner maintenance

What can the first gutter cleaning tell you about a new slate roof?

Tiny chips can wash out of newly laid slate. Record what came out, where it collected and whether it returns before drawing conclusions about the stone.

By the Slate, Tile & Metal Guild ·

At the first gutter cleaning after a slate reroof, the maintenance contractor hands the owner a handful of tiny stone chips. The photo looks alarming, especially if the invoice for the new slate has just been paid. There is a reason to ask when the gutter was last cleared before calling the quarry about the stone.

The National Slate Association traces some of this early debris to trimming, cutting and punching at the quarry and on the job. Fragments can cling to the slates after the final sweep. Rain then carries them down to the gutter over the first several months. The appearance of these fines alone does not establish how durable the slate will be.

Give the next cleaning a point of comparison

Ask the maintenance contractor to photograph the material with a scale and mark which gutter run it came from. Distinguish loose grit from a substantial fragment with a recognizable edge or nail hole. Note the installation date and any recent repair or cutting above that gutter. Once the gutter has been cleared, its next cleaning gives a better indication of what has accumulated since.

A piece that can be traced to a visibly damaged slate raises a specific repair question. Repeated fragments in one run deserve a closer look even if another gutter stays clear. Keep those observations with the original photograph for the slate contractor who assesses the roof.

Further reading

National Slate Association · Technical Bulletin No. 9, Slate Myths. The association discusses slate fines during the first several months after installation.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles