Look up the Lewes Quaker Meeting House in Historic England’s register and you will find a timber frame, a brick base and mathematical tiling in the materials description. A researcher who copies “tile” into a roofing spreadsheet at that point has skipped the sentence that identifies what is actually on the roof.
In Sussex, mathematical tiles were used to clad walls. The clay units could imitate the faces of bricks so closely that even a street photograph is an uncertain guide to the material. Historic England’s conservation bulletin on mathematical tiles explains the resemblance and illustrates how the units worked as cladding.
Read the exterior description by building part
The meeting house listing describes the front pitch of the original meeting house as slate and the rear pitch as handmade tile. Its gable and rear wall also carry tile. A single entry for “tiled rear” would leave an estimator unsure whether the proposed work includes the vertical surface, the pitched surface above it, or both.
Start the drawing with three separate labels for this example: front roof slope, rear roof slope and wall cladding. Beside each, record the material that the listing attributes to that location. Leave the quantities blank until the survey identifies the extent of work. For a roof tile submittal, ask for a sample or reference photograph specifically from the affected pitch. A correctly labeled wall tile can be valuable evidence for the building file while answering an entirely different repair question.
