Preserving the craft. Building its future.

Slate · Historic roof investigation

Why is there lime mortar beneath the slates in this old roof?

Record where the mortar survives and what lies above it before deciding which trade and repair detail the building needs.

By the Slate, Tile & Metal Guild ·

A handful of mortar on an attic floor might prompt a call about a chimney. First look at what is directly above the debris from a safe, accessible position. On some older roofs the mortar was applied deliberately between the battens against the underside of the covering. Its location matters more to the repair request than the loose fragment alone.

Cadw, the Welsh heritage service, describes this practice as torching. On traditional roofs in Wales it helped steady the covering and limit wind-driven rain or snow. Movement and water entry can both loosen it. This Welsh example gives an investigator a detail to look for. It does not identify the construction of an unfamiliar building from the appearance of debris.

Give the inspector two views of the same bay

Mark the bay on a simple attic plan using a recognizable feature such as a gable or chimney. Photograph the surviving material as well as the loss, including the battens in the frame. Ask the roofer to relate that position to the corresponding exterior slope and record displaced slates, flashing defects or other observations separately. An intact neighboring bay may show how the mortar was originally finished.

If an estimate simply says “repoint roof,” ask which surface the contractor means and how the underlying cause will be assessed. Retain the photographs before disturbance and have a conservation professional identify a compatible treatment for that building. Earlier descriptions or photographs can help date a change in construction. The Slate Roofing USA archive guide suggests places to look.

Further reading

Cadw — Roofs, guidance on historic torching. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles