Preserving the craft. Building its future.

Slate & clay tile · Import receiving

What the stamp on an imported roofing crate tells you

Check the skid, crate and loose timber blocking before a slate or clay tile shipment leaves the exporter, and keep the wood treatment mark separate from the roofing lot label.

By the Slate, Tile & Metal Guild ·

A supplier sends two photographs before loading a container of roofing slate. One shows the lot number on a paper label. The other shows a mark burned into the wooden skid. Save both. The first helps you trace the stone. The second belongs in the importer’s packaging record. A country code in that second photo cannot establish where the stone was quarried. The same distinction applies to a crate of clay tiles and the factory that fired them.

Look underneath the plywood

Ask the packer what the crate walls, runners and loose blocks are made of. Imagine plywood sides fastened to solid timber runners, with additional wood wedged between crates. USDA’s Animal and Plant Health Inspection Service (APHIS) lists plywood among its alternatives to regulated wood packaging. That answers the question about the sides. The importer still needs to check the runners and the loose blocking, called dunnage. A photograph of a plywood panel alone would miss both.

Read the mark while the crate is accessible

The APHIS import guide illustrates the international plant protection mark. Alongside the IPPC symbol are a country code, the facility identifier and a treatment code. For example, HT identifies heat treatment of the wood. It says nothing about freeze resistance of clay tile or the grade of roofing slate. Ask for a photograph clear enough to read the whole mark and a wider view tying it to the crate. Have the exporter check the actual packing wood for signs of pests before loading. Photographs document that conversation; a border inspector makes the entry decision.

Write the packing question into the order

A useful request to send before dispatch is “Please identify the packaging provider, confirm the requirements for the solid wood in the skids and blocking, and show where we can read the treatment marks after packing.” If a piece of blocking is added after the photographs, ask the packer to include it in the check. If an inspector issues an Emergency Action Notification, send the notice to the importer responsible for the entry and follow the instructions from the authorities.

Keep the roofing lot identifiers in the receiving file as well. Slate Roofing USA’s pallet lot map guide explains how to trace slate through a job. For clay tile deliveries, use Tile Roofing USA’s delivery and storage guide when planning where the cleared load will go.

Further reading

USDA APHIS — Importing wood packaging material into the United States. APHIS directs importers to its Agricultural Commodity Import Requirements database for the rules applicable to a particular shipment.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles