A slate ridge estimate comes back at half the length on the architect’s schedule. Before changing the order, ask which copy of the drawing the estimator measured. The words “¼ inch equals 1 foot” shrink along with the lines when someone prints the sheet at half size. The words remain legible, but the physical ruler now reads a different scale.
Test the copy against a labeled dimension
Suppose a plan labels a straight wall 32 feet long. On the original quarter-inch-scale drawing, the line would measure 8 inches. On your copy it measures 4 inches. On this view, each inch therefore represents 8 feet. A horizontal ridge shown 6 inches long represents 48 feet. Reading those same 6 inches at the printed quarter-inch scale would yield only 24 feet.
Try a second labeled dimension, preferably in the other direction. If the checks disagree, the scan may be stretched, or you may be measuring between different endpoints. Ask for the dimensioned original. Avoid carrying a correction from the main plan to an enlarged detail. The National Park Service’s measured-drawing guidelines describe how a building can be shown at one scale on the overall sheet and at a larger scale on subsequent sheets.
Record the sheet, revision, view, check dimension and endpoints next to the estimate. A horizontal ridge can appear at true length in plan. A hip that rises from eave to ridge has a vertical component and needs a slope measurement or section as well. Confirm disputed lengths with the designer before ordering. The Slate Roofing USA field calculator handles field pieces separately, so keep the corrected ridge length on its own line.
