Imagine a small delivery with two groups of 100 equal-width slates each. The longer, thicker group contains 38 purple pieces. The shorter, thinner group contains two. The invoice shows 40 purple out of 200, exactly the 20 percent requested by piece count. Yet if the long slates go near the eaves and the short ones near the ridge, the color changes sharply as the eye travels uphill.
The National Slate Association recommends checking the color percentages within each graduated length and thickness. Start with the approved elevation. An intentional change of color between courses calls for different targets. A continuous blend calls for checking that each group can deliver it.
Make the receiving sheet match the design
Give each length and thickness combination its own row. Enter the specified mix, the delivered quantity of each color and the pallet identifiers. In the example, moving 18 purple pieces between the two stacks would improve the arithmetic but leave both stacks with wrong-size pieces. The supplier needs the breakdown while there is still time to supply or exchange the right sizes.
Agree whether the design measures color by piece count or visible area. A broad slate contributes more visible color than a narrow one at the same exposure. Keep the receiving sheet with the approved mockup so the project slater can review both before laying out the courses.
