A close-up of a glazed roof tile shows a fine web of lines in the green finish. Someone has written “cracked tiles” beside the photo and asked the roofer to count replacements. What should that count include? A line seen on the glazed face establishes where to look. Its depth is still an open question.
Ludowici uses the term crazing for cracking in a glaze and explains that the glaze and clay body need to move together as they expand and contract. The manufacturer discusses a chip in the finish separately. These distinctions give the owner and roofer a more useful vocabulary than a single entry for damage.
Follow the same piece through the record
Ask the roofer to key the close-up to a wider view that locates the piece on the roof. If that tile is already coming off as part of approved work, have the roofer photograph the corresponding edge and back before it leaves the site. Mark whether the line continues onto either face and whether a piece of glaze or clay is missing. Identify places the roofer could not inspect.
Send that group of images to the maker or preservation specialist with the product identity, if known. Keep observed finish defects, confirmed body breaks and unresolved pieces in separate counts until the reviewer sets the scope. Use those same locations in the post-repair walkthrough.
