Someone looking down from a neighboring building might sketch a roof with broad panels and raised seams and label it “lead.” On some historic British roofs, both the panels and the narrow pieces over their joints are slate. Misidentifying the material sends a repair inquiry to the wrong trade. Calling the narrow pieces decorative can leave an essential part of the roof off the drawing.
The Society for the Protection of Ancient Buildings illustrates two versions of patent slating. Large single-lapped slates meet side by side. A separate strip covers the joint between their sides. In the early Rawlinson form the strip is flat. A later form uses a rounded slate roll, which helps explain the resemblance to metal roofing. SPAB recommends retaining the distinction when conserving these roofs.
Give the covering strip its own detail
Ask the conservation surveyor for a view along the slope and a sketch across one surviving joint. Label the broad field slate and the narrow piece separately. On the sketch, show whether the cover has a flat or curved top, its width across the joint and where its ends fall relative to the courses. Identify which features were visible and which underside details still need professional investigation. A single dimension for the whole panel misses the profile a craftsperson needs to reproduce.
For an unidentified roof, keep the early material description provisional. Check older specifications or dated repair photographs using the Slate Roofing USA archive-search guide. A distant view can justify asking about patent slating. An attributed drawing or a close survey of surviving work provides a better basis for the repair detail.
