A supplier asks how many pieces the mansard needs. One loose slate measures 16 by 8 inches. Dividing the roof area by those 128 square inches will undercount the order. On a Dutch lap roof, one slate covers part of its neighbor in the same row. The row above also hides part of its height.
Count the face that shows
The National Slate Association documents a Philadelphia roof where the 16-inch dimension ran horizontally. Four inches disappeared under the adjacent slate, leaving 12 inches visible. The exposed height varied from 5¼ to 6 inches. At a 6-inch exposure, each face covers 72 square inches. At 5¼ inches, it covers 63. Across a hypothetical 100 square feet of uninterrupted field, those two measurements give 200 pieces and about 229 pieces respectively, before any cuts or spares.
On a curved face, ask the surveyor to count pieces in a representative row and mark how many rows share its layout. Count separately where the curve changes the exposure or a window interrupts the run. Send the supplier the resulting piece count, the orientation of the blanks and the treatment of partial pieces at the ends. An elevation photograph marked with those groups gives the next estimator a way to check the arithmetic.
The Slate Roofing USA exposure guide explains the double-lapped field calculation common in other estimates. Record which lap the survey actually found before using a coverage table.
