Preserving the craft. Building its future.

Clay & concrete tile · wildfire readiness

Where embers can enter beneath curved roof tiles

What to ask a tile roofer about open tile ends, bird stops and debris when reviewing a home’s wildfire exposure.

By the Slate, Tile & Metal Guild ·

Stand back from the gutter and look at the bottom row of a curved tile roof. The arch you see from the yard can leave a hollow space between the tile and the roof beneath it. In wildfire country, that opening deserves its own question when a roofer inspects the property. What keeps windblown embers out of the space under the tile?

Look at the end of the tile

In its Waldo Canyon Fire field report, the Insurance Institute for Business & Home Safety documented open tile ends with debris underneath that appeared to include nesting material. The report illustrates how embers could reach combustible material beneath a fire-rated covering. CAL FIRE’s home-hardening guidance calls for closing gaps beneath roof tiles where embers can enter.

A shaped closure at the foot of a tile is often called a bird stop. Ask the roofer to show you one intact section of your eave and identify the closure used there. That gives you a reference for understanding a photograph of an adjacent section with a missing piece, a displaced tile or debris behind the edge. Keep your observations at ground level and have the roofer examine areas hidden by the gutter.

Put the location in the repair request

Suppose the front elevation has closures beneath every visible curve, but the garage addition has several exposed arches. A useful request would say, “Please inspect the bottom course over the garage door, compare it with the front eave, and identify what belongs at the open ends.” A wide photograph locating the addition and a closer view from the ground give the roofer more to work with than a request to clean the gutters.

Ask the roofer to identify the tile profile, the closure detail specified for that system, and how the proposed work preserves the intended drainage and ventilation. Have the estimate distinguish removing existing debris from correcting the opening where it collected. At completion, ask for a photograph of the same section so you can see which openings the work addressed.

For the separate question of what an assembly fire rating covers, see the Tile Roofing USA guide to clay tile fire ratings. On a building with a separate natural-slate slope, identify that area separately for the specialist using the resources at Slate Roofing USA. The curved-tile end detail applies to the profiled tile portion of the building.

Further reading

CAL FIRE — Hardening Your Home. The site-specific repair detail belongs to the roofing professional. The IBHS case study linked above documents observations from the Waldo Canyon Fire.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles