Preserving the craft. Building its future.

Slate · Purchasing

Will a 50-pound carton cover the revised slate nail schedule?

Convert the approved fastener count to cartons using the count per pound for the actual length and gauge being ordered.

By the Slate, Tile & Metal Guild ·

The designer has changed the approved nail length and the buyer has updated the description on the purchase order. The line still reads “one 50-pound carton.” Before releasing it, check the number of fasteners in that carton. The supplier sells by weight while the crew’s takeoff counts individual nails.

Slate Valley Supply lists 150 nails per pound for its 1½-inch, 10-gauge smooth copper slating nail. Its 2-inch nail in the same series is listed at 115 per pound. By those figures, the first carton represents about 7,500 nails and the second about 5,750. The same shipping weight buys roughly 1,750 fewer fasteners after the change.

Start with the approved count

Suppose the project takeoff calls for 6,000 of the longer nails before any allowance. Divide by 115 to get about 52.2 pounds. One carton falls about 250 nails short even before losses. If the vendor only supplies whole cartons, ask whether the balance can come from approved stock on hand or another verified package size before rounding the entire purchase up to 100 pounds.

Record the length, gauge, metal, shank and supplier beside each conversion. Use the count for the selected fastener whenever the specification changes. If the design uses several lengths, carry each group separately through the calculation. Start the material takeoff with the Slate Roofing USA field-slate calculator, then apply the fastening schedule specified for each part of the roof.

Further reading

Slate Valley Supply — 10-gauge smooth copper slating nail carton quantities. Counts in this example come from the cited supplier’s listing for a specific product.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles