Preserving the craft. Building its future.

Concrete tile · Receiving inspection

What should the receiver do with a scuffed concrete roof tile?

Preserve a marked sample and its delivery information so the supplier can distinguish a sealer scuff from physical damage.

By the Slate, Tile & Metal Guild ·

A streak across a newly delivered concrete tile catches the light while the surrounding finish looks even. Before asking for a replacement pallet or trying to wipe away the streak, set aside an example the supplier can examine in its delivered condition.

Eagle’s surface-mark bulletin explains that handling can disturb the sealer applied at the factory. Eagle expects scuffs of this kind to fade as the sealer weathers and says they do not change the underlying color or structural integrity. That explanation concerns a surface mark. A missing edge or a crack through the tile needs a separate decision.

Keep the receiving sample useful

Photograph the face of a loose piece in ordinary light, then angle it so the streak appears clearly. Include a photograph of the delivery label and an adjacent piece from the same package. Tell the supplier whether the mark was present when the package was opened. If a tile also has a broken corner, photograph that independently so a reply about the sealer cannot close the breakage claim by mistake.

Ask which pieces may be installed, which should be held and whether the supplier wants to inspect a sample. Keep the answer alongside the delivery ticket and the project closeout record. If appearance will be checked again, agree on a viewing position and a review date. The bulletin offers no calendar date by which every mark must disappear.

Further reading

Eagle Roofing Products · Concrete Roof Tile Surface Marks, October 15, 2026. Eagle describes surface scuffs on its concrete tiles. The bulletin does not diagnose every mark or authorize acceptance of a cracked tile.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles