Preserving the craft. Building its future.

Concrete tile · Repair review

Which edge chipped on this concrete roof tile?

A photo of a missing corner can leave out the part that carries water. Ask the inspector to identify the damaged edge.

By the Slate, Tile & Metal Guild ·

Two repair estimates can each list six chipped corners and still describe different work. At the side joint of an interlocking tile, one edge covers its neighbor. The edge underneath helps channel water. A photograph looking straight down at the missing corner may show only the upper of those two parts.

Ask the roofer to label the affected edge on the inspection photo. Eagle’s October 2026 bulletin generally recommends replacing a tile with a broken underlock. It describes more limited circumstances in which a small cover-lock corner can be repaired if the broken fragment is available. A crack running across the tile face falls in the replacement category in its guidance. Record which condition the inspector actually saw.

Put the length in context

On a proposed corner repair, ask the inspector to show how far the break extends and the amount by which the courses overlap there. Eagle uses a three-inch overlap in its example. Copying that dimension into a report without checking the roof can make two different breaks sound equivalent. A picture of a loose matching spare, with its overlap edges labeled, can help an owner read the inspection photos.

The owner can now ask a precise question about the quote. Which tiles need replacement, which have a recoverable cover-lock fragment, and which still need examination because the lower edge was hidden? Keep each answer beside the corresponding photo in the repair record. The roofer can return to the unresolved locations without asking the owner to inspect the roof.

Further reading

Eagle Roofing Products · Concrete Tile Chips: Damage Assessment and Best Practices, October 15, 2026. The bulletin addresses Eagle concrete tile. Have the roofer confirm the product and applicable repair instructions for the roof under review.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles