Preserving the craft. Building its future.

Concrete tile · Roof junctions

Which tile on a shared roof decides the bonding gutter profile?

On a partial reroof, the tile staying in place can change the junction accessory needed for the new covering.

By the Slate, Tile & Metal Guild ·

A roof covering changes at the dividing line between two attached houses. One side is getting flat tiles and the other keeps its profiled concrete tiles. A merchant receiving only the new tile name knows half of what lies against the joint.

A bonding gutter is an accessory for the junction between different coverings. Marley’s UK dry-fix range illustrates the ordering problem. Its high-profile version suits profiled concrete tiles on either or both sides. The low-profile version is listed for plain tiles, fibre-cement slates and certain named interlocking products. Marley also points to the adjacent covering and the underlying roof construction as reasons a different profile may be needed.

Draw across the boundary

On a section perpendicular to the joint, label the replacement covering on one side and the retained covering on the other. Include the level of the supporting surface on each side and the shape of the nearest roll or channel. A catalogue photograph of the new tile leaves out those relationships. Have the installer verify existing conditions before confirming the order.

Ask the designer or accessory supplier to identify the project detail that accommodates both sides and how its lower end discharges. Use locally applicable products and details for US work. List the selected accessory against that particular junction in the roof tile accessory schedule. A second joint on the same job may meet a different covering.

Further reading

Marley · Dry Fix Bonding Gutters, function and compatibility. The reference identifies the scope of the example discussed here.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles