Preserving the craft. Building its future.

Concrete tile · Support layout

Which span goes into the load table for a concrete tile batten?

A batten plan shows distances in two directions. Identify the supports along the batten before looking up its load allowance.

By the Slate, Tile & Metal Guild ·

A material schedule that lists one-inch-by-two-inch battens leaves a question open: what will support each length between its ends? On a counter-batten roof, the horizontal batten carrying the concrete tiles crosses a series of supports running uphill. Those intersections help explain what the batten must span.

The Tile Roofing Industry Alliance’s Table 2 distinguishes configurations by support spacing, wood species and nominal dimensions. It states that its allowable load includes live and dead loads together. The manual also connects excessive batten deflection with possible tile breakage. Two battens can have the same lumber invoice description and work under different conditions.

Mark a single length on the shop drawing

Trace one horizontal batten and mark each point where it bears. Dimension the distance between those supports along that batten. In another color, mark the uphill distance to the next tile course. On a rectangular layout the arrows point in different directions. Entering the course spacing in place of the support spacing can lead the reader to the wrong configuration.

Send that marked view, the section showing batten orientation, and the proposed lumber species and grade to the responsible designer. Ask which table detail or separate approval covers the proposed assembly and loads. Keep the answer with the roof takeoff before accepting a substitution that changes the supports.

Further reading

Tile Roofing Industry Alliance · Concrete & Clay Roof Tile Installation Manual, Table 2 and counter-batten details. Table 2 presents specific wood batten configurations and load allowances. The project designer must confirm the applicable design.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles