Preserving the craft. Building its future.

Concrete tile · Estimating

How many sets of adhesive does a concrete tile bid allow?

Check a kit-coverage claim against the tile count and the attachment pattern the project actually requires.

By the Slate, Tile & Metal Guild ·

A flat concrete tile estimate includes an adhesive allowance in roofing squares. The supplier sells the adhesive as a set of two components. To audit the allowance, start with two items from the project documents: how many field tiles will use that adhesive and which attachment pattern the design calls for.

Garland’s Terra-Lock yield chart shows why both entries matter. For a set weighing 85.7 pounds net, the manufacturer estimates 863 flat tiles using its large-paddy placement. A paddy is a measured deposit of adhesive. The same chart expresses that yield as 9.6 squares on the assumption of 90 tiles per square.

Check an allowance by counting pieces

Suppose the approved detail uses that row, and the takeoff shows 1,900 field tiles with that attachment. Two sets at the estimated yield account for 1,726 pieces, leaving 174 outside the allowance. The arithmetic gives three whole sets before any separate allowance for field losses. If some areas have a different approved attachment, take them out of this count and price them on the appropriate basis.

Ask the bidder to identify the tile, the applicable attachment detail and the yield row beside the kit quantity. Keep trim work and waste visible as separate assumptions. A yield table estimates purchasing quantities after the attachment design is settled. The same arithmetic can help reconcile competing reroof bids.

Further reading

The Garland Company — Terra-Lock application guidelines, estimated yield chart. The cited manufacturer describes the product or condition discussed in the article.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles