Preserving the craft. Building its future.

Clay tile · Identifying a spare

Can seven different clay tile profiles share the same underside mark?

Use a marked spare and a profile drawing together before ordering a discontinued roof tile.

By the Slate, Tile & Metal Guild ·

An owner finds a manufacturer’s mark on the back of a loose clay tile and sends a photograph to a salvage yard. That can narrow the search considerably. It may still leave the yard with several profiles that carry the same mark.

Miami-Dade County’s notice 23-0125.11 illustrates the problem. Its identification drawing applies to seven Ludowici clay tile profiles, including Ludo Slate, Ludo Shake and Imperial. Later drawings distinguish the products. The notice even points out the wood-like surface striations on Ludo Shake when presenting its profile alongside Ludo Slate. A clear photo of the common marking answers only part of the identification question.

Give the yard something it can rule out

Start with a sound loose spare if one is available. Photograph the full face and back, then each edge square-on. Include a scale in the plane of the feature being measured. Record overall dimensions, which side carries the interlock and the shape of the underside where the tile hangs. Keep the stamp photo in the same file set so the supplier can connect each detail to the same specimen.

Ask which drawing matches, which candidates were eliminated and whether a physical sample is needed to confirm fit with the existing course. A match to the maker’s name alone is a poor basis for a bulk salvage order. The Tile Roofing USA matching guide helps organize the remaining information when the seller has several plausible pieces.

Further reading

Miami-Dade County — Notice of Acceptance 23-0125.11, identification mark and profile drawings. See the cited source for the scope of its guidance.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles