Preserving the craft. Building its future.

Clay tile · Dormer design

Does the clay-tiled eyebrow fit between the hip and the wall?

Locate the ends of the curved tiling before measuring the clearance beside an eyebrow dormer.

By the Slate, Tile & Metal Guild ·

A window opening fits easily between the hip and the wall on a proposed clay plain-tile roof. The elevation shows daylight on both sides of the frame. Can the roofer form the eyebrow there? To find out, trace the courses that rise from the flat roof plane, pass over the window and return to the plane again. The two ends of that sweep lie beyond the window jambs.

The UK Roof Tile Association treats the junction of the eyebrow and the main slope as a valley. Its illustrated detail calls for at least 600 mm, preferably 900 mm, between the beginning or end of the eyebrow and features such as a hip, valley or abutting wall. A dimension from the jamb to the hip can look ample even when the tile sweep ends very close to the hip.

Put the curve and the structure on the same drawing

Ask for an elevation that marks each end of the curved tiling and the neighboring roof features. Mark the rafter positions on the same view. The association locates the apex between rafters so the battens can follow a smooth curve. The centerline of a window and the preferred position for the batten curve may require coordination before the framer sets the opening.

Have the roofer and designer review those dimensions with the intended tile. Where the eyebrow runs out of room, moving or resizing the opening on paper gives them more options than discovering the conflict during tiling. Keep the agreed elevation with the roof design submittal so the approved appearance and the space needed to build it are visible together.

Further reading

Roof Tile Association · Eyebrows, critical dimensions and timber construction. The distances are UK association guidance for the illustrated plain-tile eyebrow. Have the designer review the actual geometry and tile.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles