Preserving the craft. Building its future.

Clay tile · Habitat planning

Where does the flight path go on a clay nesting-tile drawing?

Check the approach, roof orientation and intended species before transferring a nesting-tile symbol to another slope.

By the Slate, Tile & Metal Guild ·

A roof plan has a symbol for a nesting tile. Moving the symbol two courses to clear a dormer looks straightforward in plan. Viewed from the garden, the proposed entrance now sits directly over the dormer roof. For a swift, the space immediately outside and below the entrance is part of the design.

Wienerberger describes Dutch roof tiles that incorporate nesting chambers and distinguishes models for swifts and sparrows. In its swift example, the bird needs clear space to approach and to drop from the opening on departure. The manufacturer also discusses the risk of excessive heat and favors an east- or north-facing slope for that design in its setting. A matching tile profile alone does not settle the location.

Review the elevation alongside the tile schedule

On the elevation, mark the intended entrance, the dormer outline, nearby stacks and vents. Indicate north on the roof plan. Ask the designer and habitat adviser to check the proposed position against the named species, the product instructions and local conditions. If a later drawing adds a flue in that space, flag the change while a new position can still be assessed.

Give the nesting tile its own entry on the tile accessory schedule. Include the intended species, model, slope and elevation reference so an ordinary vent with a similar exterior shape cannot be substituted unnoticed. At handover, a labeled elevation also helps maintenance staff recognize a deliberately open entrance from ground level.

Further reading

Wienerberger · Bird nest roof tiles, Dutch designs for swifts and sparrows. The manufacturer describes particular European nesting tiles and species. Use locally appropriate ecological advice and product instructions for a different site.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles