Preserving the craft. Building its future.

Slate · Finish protection

Will the blue layout line come off the finished slate?

Use an offcut to settle a marking question before the crew snaps a line across exposed slate faces.

By the Slate, Tile & Metal Guild ·

A finish note tells a roofer to use blue chalk for temporary layout marks. A crew member picks up a blue bottle. If the work includes exposed slate faces, that instruction leaves an important detail unresolved: which blue chalk is in the reel?

IRWIN sells a standard blue marking chalk. The same manufacturer also sells indigo blue expressly labeled as permanent staining chalk. Two blue powders from the same supplier can therefore carry very different descriptions. The color alone gives the crew no assurance that a line on a finished roof will clear by handover.

Make the finish decision at the workbench

Ask the slater to identify which planned marks will be covered by another course and which could remain in view. Where an exposed mark is proposed, use a spare piece of the actual slate to show the owner or designer the result. Identify the exact chalk and the proposed removal method, and ask the slate supplier about finish compatibility before the trial. Keep an unmarked piece beside the trial so any residue is visible. If the result is unacceptable, revise where or how the work is marked before laying that area. Keep the approved test piece with the project’s slate samples.

Further reading

IRWIN — Indigo Blue Permanent Staining Marking Chalk, product 4935518. The cited source documents the product discussed above.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles