Preserving the craft. Building its future.

Concrete tile · Substitutions

The concrete tile count stayed the same. Why did the roof weight change?

Check a standard-weight substitution against the lightweight tile carried in the design using an actual manufacturer’s data table.

By the Slate, Tile & Metal Guild ·

A distributor offers the same named profile in standard weight because the lightweight version is unavailable. The piece count on the quote still matches the takeoff. To find what changed, read across the weight columns for that exact profile.

Compare one square, then the covered field

Eagle lists its Bel Air profile at 88.5 tiles per 100 square feet. Its approximate weights for that area are 970 pounds for standard and 720 pounds for Eaglelite. The difference is 250 pounds per square, or 2.5 pounds per square foot of covered roof surface. For a hypothetical 1,600-square-foot tile field, the difference is about 4,000 pounds of installed field tile. Sixteen squares of surface is the input here. Pallet weights and an order allowance for broken pieces answer different questions.

A buyer could easily miss the substitution if the quote said only “Bel Air, 16 squares.” Put the variant, supplying region and data-sheet date beside the profile name. Ask the supplier to confirm the exact unit it can deliver. Eagle notes that availability varies by region.

Send the difference to the person reviewing loads

Keep both product rows and the area basis with the substitution request. The 4,000-pound figure does not describe how the structure carries the roof or the loads from other layers, accessories or material staged during construction. The designer needs the proposed assembly to evaluate it. Record which variant was accepted before placing the order, then check that same designation on the delivery paperwork. Tile Roofing USA can help an owner locate tile roofing specialists for the project.

Further reading

Eagle Roofing Products — Technical Specifications. Approximate product weights and regional availability are manufacturer-specific.

Published by the Guild as part of Tim Kelly’s Slate Boss resource network. These educational guides support project conversations and do not replace an on-site inspection or a project specification.

← All roofing articles